We mainly produce T63, T80 and T130. Different types meet the needs of customers in different markets.

① Different output: T63 has 3 cavities, T80 has 4 cavities;

② Different structure: T63 is of "C" type, and T80 is of "H" type (H type has better stability, and it is recommended to choose T80 if the budget allows);

③ Different oil usage: T63 requires lithium-based ester, while T80 does not, and its oil circuit is closed (cleaner and more fuel-efficient).

One worker is sufficient to achieve automated production.

It can operate for 24 hours.

It depends on the sample size and the number of cavities. Generally, the waste edge rate for square shapes is 6% to 14%, and for circular and irregular shapes, is 14% to 20%.

Taking the 450 container mold as an example (3.5g/cavity, 4 cavities, scrap edge rate 14.5%)

Each mold requires 4.09g of raw materials. One ton of raw materials can produce approximately

244,499 pieces (1,000 pieces per box internationally and 1,500 pieces per box in India). It consumes approximately 49.08 kilograms of materials in one hour. ​

 It needs to be packaged by a dedicated packaging machine, which is not within our product range.

We complete the entire set of mold production from design to manufacturing. We can customize ordinary container molds and high-end wrinkle-free container molds according to customer samples.

Yes. We can customize molds for various punch presses, including brands from Italy, South Korea, India, China, etc.

Coated container can be made (using coated raw materials is fine). The coating is safe and the color can be customized.

 3003H24, 8011H22, 3004H24; 3004 is not recommended when the material thickness is less than 50 microns.

The logo block part is detachable and can be configured with different logos.

 After the above-mentioned process treatment, the hardness reaches HRC 58 to 60, featuring both high wear resistance and long service life.

Yes.

 T63 is 19.8KW, and T80 is 26KW (excluding the 5.5KW of the strapping machine, the indirect operation of the strapping machine can be ignored).

Yes. Both products and equipment are provided

Wooden box packing

It must be 40 HQ. Usually, one production line can be filled with 4 sets of molds.

① Provide an installation video for customers to install independently as instructed;

② Customers can come to the factory to learn installation and operation, lasting 2 days;

③ Engineers can be dispatched for on-site installation and training upon customer request (customer shall bear visa, round-trip air tickets, accommodation and engineer service fee of USD 100/day).

The warranty period is 1 year. Within one year, any non-human-caused damage will be replaced

free of charge. After the warranty period, only the cost will be charged for replacement parts (no profit margin will be made). Provide lifetime technical support.