63 Ton Fully Automatic Aluminium Foil Container Making Machine with Wrinkle Wall and Smooth Wall Moulds on One Press Line

The LK-T63 is a fully automatic aluminium foil container making machine built around a 63-ton press. The press body uses a C-frame structure, and the lubrication system runs on lithium-based esters. With 3-cavity moulds, it produces the small and medium containers used for takeaway boxes.

Wrinkle wall and smooth wall moulds both run on the same press line. One complete line consists of a 950/1450 decoiler, the T63 press, a mould lifter arm, safety doors, a scrap aspirator, a control cabinet, and a 3-way stacker. A Mitsubishi PLC and touch screen are housed in the control cabinet.

Boxes produced on the line are used for restaurant takeaway, catering, bakery, and food packing. Square, round, and irregular shapes are produced by changing the mould, and moulds can be customized to customer samples.

Line composition: Decoiler + Press T63 + Scrap Aspirator + Control Cabinet + 3-Way Stacker.

• Applicable to wrinkle wall and smooth wall container moulds
• Automatic counting
• System automatically alarms and displays faults on the touch screen
• 60 sets of mould parameter storage
• Quick mould changing device
• Safety doors stop the press automatically when a door is opened by hand
• Mould lifter arm on the platform for mould loading and unloading

• 63-ton press with 3-cavity moulds fits the small and medium container sizes used for takeaway boxes.
• Wrinkle wall and smooth wall moulds run on the same press line, so one line covers both box styles.
• Square, round, and irregular box shapes are produced by changing the mould, and moulds can be customized to samples.
• Complete line from decoiler to 3-way stacker; feeding, pressing, scrap removal, and stacking are continuous.
• Servo-controlled feeding with the feeder level adjustable from 150 mm to 300 mm above the workplate.
• Maximum foil passage width is 950 mm, so 950 mm foil runs without extra slitting.
• Working speed is 35 to 70 strokes per minute and is adjustable on the panel.
• Mitsubishi PLC, ABB main motor, and Schneider low voltage components are used in the control system.
• Up to 60 sets of mould parameters are stored in the panel, which shortens setup for repeat orders.
• Safety doors with automatic stop protect the operator during production.