Aluminium Foil Container Making Machine 80 Ton Closed Lubrication System Clean Production Multi Cavity Foil Press

The 80-ton aluminium foil container making machine is a fully automatic press line built for multi-cavity production of aluminium foil containers. Its main body uses an "H" type frame, which gives the worktable higher rigidity and keeps forming stable during long, continuous runs. The lubrication system is a closed (enclosed) circuit: lubricant circulates inside the machine instead of being sprayed onto the tooling, so the working area stays cleaner, less oil is consumed, and the containers come off the line clean. That closed lubrication layout is what makes clean production possible on this press.

A complete line includes the foil decoiler and feeder, the 80-ton press, the mould lifter arm, the safety door, the scrap aspirator, the control cabinet and the stacker. The machine runs both wrinkle wall and smooth wall container moulds, from single cavity up to multi cavity (commonly 4–6 cavities at this tonnage), and stores multiple mould parameter sets so switching between products is quick. In automated production, one operator is enough, and the line can work around the clock.

• H-type frame with a solid worktable — The press body uses an "H" type frame and a solid worktable rather than a hollow one. Rigidity is higher, the table stays stable under repeated stamping, and the service life of the press is longer.
• Closed lubrication for clean production — Lubricant runs in a closed circuit inside the machine, so oil mist and oil leakage on the shop floor are reduced and less lubricant is used. A cleaner machine, a cleaner workshop, a cleaner container.
• Multi-cavity production — Designed for multi-cavity moulds, typically 4–6 cavities at this tonnage. Moulds can be customised from single cavity to multi cavity according to your sample and output plan.
• Wide material compatibility — Handles both thin and thick aluminium foil, and performs well on thin material with stable forming. Common alloys are 3003H24, 8011H22 and 3004H24.
• Fast mould change — A mould lifter arm and a hydraulic pump make mould changing quick, and in normal cases no wrench work is needed: one worker finishes the job in about 15 minutes.
• Safety and self-diagnosis — A safety door stops the machine immediately if it is opened during production. When a fault occurs, the machine stops automatically, alarms, and displays the fault on the touch screen, so the operator knows where to look.
• One-stop line supply — Feeder, press, mould, safety door, scrap aspirator, control cabinet and stacker are supplied as one matched line, and the moulds come from the same workshop. Capacity, workshop layout and commissioning are therefore planned as a whole instead of being pieced together from several suppliers.
• Export and service experience — Focused on aluminium foil container equipment and moulds since 2010, with installation and training support overseas, a one-year warranty, and long-term technical support and spare parts supply.

The figures above are standard configuration values. The actual configuration is adjusted according to mould cavities, product size and local power supply standard, and can be confirmed against your product plan.