80 Ton Aluminium Foil Container Making Machine with 4 Cavity Mould and Servo Feeding for 9000-12000 Pcs/H Output

A lean installed power for the 80-ton class. Where electricity is expensive or supply capacity is limited, the T80 still runs a full production schedule without straining the workshop's power budget.

Four containers per stroke. Combined with the servo feeder's steady average 50 strokes/min, a single line produces 9,000–12,000 pcs/hour — output that would otherwise need multiple smaller machines and multiple operators.

The servo-motor feeder advances foil to the exact step length, stroke after stroke. Accurate positioning means less waste edge, fewer misfeeds, and consistent container quality — supporting a defect rate as low as 1/1000.

Decoiler, servo feeder, 80T press, scrap collection, automatic counting and multi-way stacking — one line, one worker, 24 hours a day. The operator supervises; the machine produces.

60 sets of mould parameters stored in the controller. Change the mould in 15 minutes with the hydraulic clamping system, recall the recipe on the touch screen, and the line is running the next product.

"H" frame structure for stability under continuous multi-cavity work, closed lubrication circuit, safety door with auto shutdown, and a 10-year designed service life. Moulds from our own workshop are good for 30 million strokes.