Aluminium Foil Food Container Production Line 130 Ton Heavy-Duty for Large-Scale Manufacturing

The LK-T130 Heavy Duty Aluminium Foil Food Container Production Line is a 130-ton H-frame automatic press line designed for large-scale, continuous aluminium foil container production. It is built for manufacturers who already have production experience and need to increase hourly output without adding operators, floor space, or compromising product quality.

The production capacity of this line comes from mould cavity numbers rather than higher stamping speed. The heavy-duty 130-ton H-frame, wide foil feeding capability, and large mould envelope allow higher cavity configurations than smaller models. This means more containers can be produced in each stamping cycle while maintaining a stable working speed and forming process.

The complete production line integrates automatic foil feeding, stamping, forming, counting, stacking, and scrap collection: Decoiler + Press T130 + Scrap Aspirator + Control Cabinet + Stacker. One operator can run the line, and it supports 24-hour continuous production.

The oil lubrication system mainly adopts enclosed lubrication, helping keep the machine and workshop cleaner while reducing lubricant consumption. Safety doors are installed to protect operators, and the machine stops automatically if a safety door is opened during production. The platform is equipped with a mould lifter arm and hydraulic worktable, allowing one worker to complete a mould change in approximately 15 minutes.

Each additional mould cavity requires additional forming force, so the number of cavities is limited by press tonnage. The 130-ton heavy-duty press supports the highest cavity configurations in our product range, delivering more containers per stamping cycle instead of relying on higher stamping speed.

It is designed for manufacturers seeking higher production capacity, stable forming performance, and long-term continuous operation.

The main body adopts a heavy-duty H-frame structure with a reinforced frame design, maintaining rigidity under repeated heavy stamping cycles.

At higher cavity configurations, structural stability is particularly important for maintaining consistent forming quality and container thickness across all mould cavities during continuous production.

Its advantages include:

• High structural rigidity under heavy stamping pressure.
• Stable machine operation during continuous production.
• Reliable mould alignment.
• Consistent forming quality across multiple cavities.
• Suitable for long-term industrial production.

The machine supports wide aluminium foil feeding and a larger mould installation area, allowing more flexible multi-cavity mould layouts.

The larger working area provides additional space for arranging multiple container cavities, making the T130 suitable for manufacturers producing large quantities of aluminium foil food containers.

The pneumatic system provides stable air pressure to support consistent machine operation, while the servo-controlled foil feeding system ensures accurate and stable material positioning.

At higher cavity configurations, feeding accuracy is particularly important because it directly affects material utilization, forming consistency, and production efficiency.

The oil lubrication system mainly adopts enclosed lubrication, helping reduce lubricant consumption and keep the machine and production workshop cleaner.

Its advantages include:

• More economical lubricant consumption.
• Reduced oil contamination.
• Cleaner machine operation.
• Improved lubrication efficiency.
• Better suitability for continuous production.

The automatic control system integrates production counting, automatic alarms, and fault information display on the touch screen.

Its main features include:

• Automatic production counting.
• Automatic fault alarms.
• Fault details displayed on the touch screen.
• Storage of up to 60 sets of mould parameters.
• Quick mould parameter recall for repeat orders.
• Multi-language touch screen interface.

With mould parameter storage, repeat production orders can be started using previously saved settings, reducing manual setup time and improving production efficiency.

The machine is equipped with a mould lifter arm and hydraulically adjustable worktable, making mould installation and removal more convenient.

One worker can complete a mould change in approximately 15 minutes under suitable operating conditions, without conventional wrench-based adjustments.

This reduces downtime when manufacturers need to switch between different container products.

Safety doors are installed to protect operators. If a safety door is opened during production, the machine stops automatically.

The complete production line includes:

• Decoiler.
• 130-ton H-frame press.
• Scrap aspirator.
• Control cabinet.
• Automatic stacker.

Looking for a heavy-duty 130-ton aluminium foil food container production line for large-scale manufacturing?

The LK-T130 is designed for established aluminium foil container manufacturers seeking higher mould cavity configurations, increased production output, and reliable continuous operation.

Whether you are expanding an existing factory or planning a new large-scale production facility, we can provide a complete production solution according to your container specifications, production targets, and factory conditions.

Our engineering team can help you:

• Select suitable mould cavity configurations.
• Evaluate existing mould compatibility.
• Design customized aluminium foil container moulds.
• Configure complete automatic production lines.
• Plan multi-line factory layouts.
• Select suitable scrap balers and auxiliary equipment.
• Calculate expected production output and material requirements.